RECONS POWER EQUIPMENTS PVT. LTD.
(Formerly known as Rectifiers & Controls)
(An ISO 9001 : 2015 Company)
(Formerly known as Rectifiers & Controls)
(An ISO 9001 : 2015 Company)
RANGE : Upto 1000 kVA
The need of voltage stabilization is met with a Rolling Contact Type (Air Cooled) L.T. Automatic Servo Voltage Stabilizer, which can be installed near the load centers or in the event of Indoor Installations, like Basement or Rooftops. Since no oil is used, these L.T Stabilizers are fire proof and free of any oil spillage. The range of input supply for stabilizer depends upon the voltage condition at the supply point. However, some standard ranges for LT Automatic Voltage Stabilizers are as under.
| Input Voltage Range | – 300 V – 460 V / 320 V – 460 V / 340 V - 460 V / 360 V – 460 V |
| Output Voltage | – 400 / 415 V ± 1% |
| Reduction in Breakdown of Electrical Equipment/s. |
| Energy Saving ranging from 5% to 20%. |
| Reduced Electricity Bill. |
| Wear & Tear of the Carbon is minimal due to friction less and smooth surface of the winding track and rolling mechanism of the carbon roller. |
| Better current carrying conductor as Copper Strip are used instead of copper wire. |
| Low No Load Losses due to the use of pure CRGO Core. |
| Inspection of Carbon Roller can be done without taking out the whole assembly. |
| In case of failure of the automatic controller, the operation can be shifted to motor control, in case of failure of motor; the same can be shifted to manual mode. |
| Efficiency of RECONS LT Automatic Servo Voltage Stabilizer is approx. 98% to 99%. |
| Installation can be done for Indoor / Outdoor services. |
| Life of RECONS LT Automatic Servo Voltage Stabilizer under normal working conditions is 15 – 20 Years. |