RECONS POWER EQUIPMENTS PVT. LTD.
(Formerly known as Rectifiers & Controls)
(An ISO 9001 : 2015 Company)
(Formerly known as Rectifiers & Controls)
(An ISO 9001 : 2015 Company)
RANGE : Upto 8000 kVA in 33 KV Class
HT Automatic Voltage Stabilizers are used to obtain stable input voltage regardless of voltage variations received from power companies. Voltage fluctuations not only cause breakdowns but also have a significant impact on other aspects of production. Recons technically advanced HT Automatic Voltage Regulator operates continuously on load and provides a stable voltage on the HT side. The voltage fluctuation in industrial units with a standard distribution transformer with offload tap changer with High Tension Voltage (HT) is regulated to a stable output voltage of 33 KV, with a tolerance of +/-1%.
Construction & Working
In H.T Automatic Voltage Stabilizer, helical coils are mounted on CRGO core assembly. Carbon rollers that travel the length of the coil track, are mounted on a fiberglass carrier board. The output terminals are linked to these carbon rollers. To reduce the effect of core-flux fringing, numerous compensating windings are connected in parallel, near the regulating coil and are short circuited, keeping the reactance of the regulator constant at any position of the rolling contact.
| Distribution Transformers are utilized to full capacity. |
| Low power losses due to correction of low or high voltage at the initial stage. |
| Protection from fluctuations on the H.T side, ensures longer life of distribution transformers. |
| For higher ratings, the installation cost is less in comparison to LT Automatic Servo Voltage Stabilizers. |
| Multiple Distribution Transformers can be connected to a single unit of H.T Automatic Servo Voltage Stabilizer. |
| Economically viable solution for wide voltage fluctuation ranges (eg. 8 KV – 13 KV or 28 KV – 36 KV etc.) and huge capacities like 2500 kVA and above. |
| Flexibility of installing anywhere on the feeder line. |
| In the event of replacement of the Motor or Motor Shaft, the same can be done easily, without opening the top cover, due to the external fitting of the Motor. |
| For any connected load or upto full load, the output voltage of H.T Automatic Servo Voltage Stabilizer remains constant. |
| Voltage Correction response time is 20 microseconds. |
| Energy saving ranges between 10% to 20%, due to minimum load losses and higher efficiency (above 98%). |